Royal Enfield Interceptor 650 - Service manual > Components Removal from Engine

Engine / Components Removal from Engine

WARNING The engine and exhaust system get extremely hot during normal operation and direct contact with skin can cause serious burns. Make sure engine is in normal temperature (OR) cooled before starting operation.

NOTE

  • Ensure the motorcycle is upright on a firm and flat surface.
  • Start the engine and allow the engine and oil to warm up for a few minutes and then turn it OFF to facilitate easy draining of oil.

See also:

 Royal Enfield Interceptor 650 - Service manual > Engine

 Royal Enfield Interceptor 650 - Service manual > Drain Plug

Loosen and remove oil filler cap (a) from the crankcase top on the RH side. Use an adjustable plier with soft jaws to unscrew filler cap if necessary. Place a tray under the engine, loosen and remove magnetic drain plug (M14) (a) along with washer (b) from the front end of the oil sump. Allow the engine oil to drain out completely from the engine.

Motorcycles: