BMW R 1250 GS GSA - Rider's Manual > Windshield
Adjusting windshield
WARNING Adjusting the windshield while driving
Accident hazard
- Only adjust the windshield when the motorcycle is stationary.
- Turn the adjustment wheel 1 clockwise to lower the windshield.
- Turn the adjustment wheel 1 counter-clockwise to raise the windshield.
Clutch
Adjusting clutch lever
WARNING Adjusting the clutch lever while driving
Accident hazard
- Adjust the clutch lever when the motorcycle is stationary.
- Turn the adjustment wheel 1 into the desired position.
NOTICE The adjustment wheel can be turned more easily if you press the clutch lever forward when doing so.
Four settings are available:
- Position 1: smallest distance between handlebar grip and clutch lever
- Position 4: largest distance between handlebar grip and clutch lever
- with Option 719 milled part package, Classic OE
or
- with Option 719 milled part package, Storm OE
or
- with HP machined-parts package OE
- Turn the adjustment lever 1 to the desired position.
Adjustment options:
- From position A: smallest distance between handlebar grip and clutch lever.
- Five steps toward position B to increase the distance between the handlebar grip and the clutch lever.
Brakes
Adjust brake lever
WARNING Adjusting the brake lever while driving
Accident hazard
- Only adjust the brake lever when the motorcycle is stationary.
- Turn the adjustment wheel 1 into the desired position.
NOTICE The adjustment wheel can be turned more easily if you press the handbrake lever forward when doing so.
Four settings are available:
- Position 1: smallest distance between handlebar grip and brake lever
- Position 4: largest distance between handlebar grip and handbrake lever
- with Option 719 milled part package, Classic OE
or
- with Option 719 milled part package, Storm OE
or
- with HP machined-parts package OE
- Turn the adjustment lever 1 to the desired position.
Adjustment options:
- From position A: smallest distance between handlebar grip and handbrake lever.
- Five steps toward position B to increase the distance between the handlebar grip and the handbrake lever.
Adjusting footbrake lever
- Make sure ground is level and firm and park motorcycle.
- Slide treadplate 1 of footrest sideways to the left to unlock.
- Fold step plate upward up to detent when riding while seated.
- Fold step plate downward down to detent when riding while standing.
Adjusting the footbrake lever foot piece
- with Option 719 milled part package, Classic OE
or
- with Option 719 milled part package, Storm OE
or
- with HP machined-parts package OE
- The distance between the feet and the height of the foot piece 1 can be adjusted by turning them by 180ยบ and installing them in position A or B.
- Remove screw 1.
- Clean the thread.
- Install the foot piece 2 in the desired position A or B.
- Turn the foot piece 2 into the desired position.
- Install the new screw 1.
See also:
BMW R 1250 GS GSA - Rider's Manual > Mirrors
Adjust mirrors Move mirror into desired position by twisting. Adjust mirror arm Slide protective cap 1 up over screw connection on mirror arm. Loosen the nut 2. Turn mirror arm into desired position. Tighten the nut to the specified torque while holding the mirror arm to ensure that it does not move out of position. Slide protective cap over threaded fastener.
BMW R 1250 GS GSA - Rider's Manual > Shifting
Adjusting shift lever Slacken screw 1. Turn foot piece 2 into desired position.