Royal Enfield Interceptor 650 - Service manual > Technical Specifications
Engine
Ignition System
Transmission
Chassis
Electrical System
WARNING Using bulbs/other electrical gadgets other than specified rating may lead to over loading/erratic behavior/premature failure of electrical system. Modifications on the motorcycle which are not approved by Royal Enfield may not only disqualify for warranty, but will also affects the performance of the motorcycle.
Dimensions
Weights
- Values/Dimensions given above are for your guidance only.
- In view of continuous improvements being done on our products, the specifications could change without prior notice.
Recommended Lubricants
CAUTION Use of wrong grade oil will reduce the life of the moving parts and seriously affect performance.
NOTE
- DO NOT Mix DOT 4 or other brake fluids together.
- Recommendation is subject to change without notice.
Engine Oil Lubrication Flow
Periodical Maintenance Schedule (PMS)
The maintenance schedule detailed here will help you maintain your Continental GT/Interceptor Twin 650CC motorcycle meticulously and to get a long trouble free service. The schedule provided herein is based upon average riding conditions and indicates at which regular inspections, adjustments, replacements and lubrications frequency are to be carried out. The frequency of the maintenance must be shortened depending upon the severity of the driving condition or if the motorcycle is used in a very dusty environment. Contact the nearest Royal Enfield Authorized Dealer/Service Center for expert advice and to carry out the required maintenance.
NOTE
- For Maintenance after 50,000 kms / 31,000 miles, Please repeat the same frequency specified above, in consultation with a Royal Enfield Authorized Dealer/Service Center.
General and Special Tools
General Tools
Measurement Tools
Special Tools
Engine
Vehicle
See also:
Royal Enfield Interceptor 650 - Service manual > Storage of Removed Parts
After disassembly of all parts including subassemblies, clean and store them in a separate storage bin to prevent from dust and place the parts near the working area.