Yamaha MT-07 - Owner's Manual > Ignition circuit cut-off system

This system prevents in-gear engine starts unless the clutch lever is pulled and the sidestand is up. Also, it will stop the running engine should the sidestand be lowered while the transmission is in gear.

Periodically check the system via the following procedure.

TIP

  • This check is most reliable if performed with a warmed-up engine.

Ignition circuit cut-off system

 

For your safety - pre-operation checks

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner's Manual.

WARNING

Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.

Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer.

Before using this vehicle, check the following points:

For your safety - pre-operation checks

For your safety - pre-operation checks

For your safety - pre-operation checks

    See also:

     Yamaha MT-07 - Owner's Manual > Spring preload

    To increase the spring preload and thereby harden the suspension, turn the adjusting ring in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting ring in direction (b). Extension bar Special wrench Spring preload adjusting ring Position indicator Align the appropriate notch in the adjusting ring with the position indicator on the shock absorber. Use the special wrench and the extension bar included in the owner's tool kit to make the adjustment.

     Yamaha MT-07 - Owner's Manual > Operation and important riding points

    Read the Owner's Manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your Yamaha dealer. WARNING

    Motorcycles: