BMW R 1250 GS GSA - Rider's Manual > Hill Start Control
Display
- with riding modes Pro OE
The symbol 1 for the drive-off assistant is displayed in the Pure Ride view and in the upper status line.
Using Hill Start Control
Requirement
The vehicle is at a standstill.
ATTENTION Drive-off assistant failure
Accident hazard
- Manually brake to secure the vehicle.
NOTICE Hill Start Control is only a convenience system for easier hill-starting and should, therefore, not be confused with a parking brake.
- Apply handbrake lever 1 or footbrake lever firmly and then release again.
Green stop symbol is displayed.
- Hill Start Control is activated.
- To switch off the Hill Start Control, activate the handbrake lever 1 or the footbrake lever again.
Stop symbol disappears.
- Alternatively, drive off in 1st or 2nd gear.
NOTICE Hill Start Control is deactivated automatically when driving off.
The stop symbol disappears after the brake has been released completely.
- Hill Start Control is deactivated.
- More information about Hill Start Control can be found in the section "Technology in detail":
- Hill Start Control function.
Switch Hill Start Control on and off
- Switching on ignition
- Call up menu Settings, Vehicle settings
- Turn Hill Start Control on or off.
Using Hill Start Control Pro
- with riding modes Pro OE
ATTENTION Drive-off assistant failure
Accident hazard
- Manually brake to secure the vehicle.
NOTICE Hill Start Control Pro is only a comfort system to make starting on hills easier and should therefore not be confused with a parking brake.
NOTICE Hill Start Control Pro drive-off assistant should not be used for gradients of more than 40%.
- Apply handbrake lever 1 or footbrake lever firmly and then release again.
- Alternatively, apply the brake for about one second after the vehicle has come to a standstill, with a gradient of at least 5%.
Green stop symbol is displayed.
- Hill Start Control Pro is now activated.
- To switch off Hill Start Control Pro, activate the handbrake lever 1 or the footbrake lever again.
NOTICE If Hill Start Control Pro is deactivated using the brake lever, automatic Hill Start Control is deactivated for the next 4 m.
Stop symbol disappears.
- Alternatively, drive off in 1st or 2nd gear.
NOTICE Hill Start Control Pro is deactivated automatically when driving off.
The stop symbol disappears after the brake has been released completely.
- Hill Start Control Pro is now deactivated.
- More information about Hill
- Start Control Pro can be found in the section "Technology in detail":
- Hill Start Control function
Adjust Hill Start Control Pro
- with riding modes Pro OE
- Switching on ignition.
- Call up menu Settings, Vehicle settings.
- Select Hill Start Control Pro.
- To turn off Hill Start Control Pro, select Off.
- Hill Start Control Pro is deactivated.
- To turn on manual Hill Start Control Pro, select Manual.
- Hill Start Control Pro can be activated by firmly applying the handbrake or footbrake lever.
- To turn on automatic Hill Start Control Pro, select Auto.
- Hill Start Control Pro can be activated by firmly applying the handbrake or footbrake lever.
- When applying the brake for approximately one second after the vehicle has come to a standstill and on a slope with at least a 5% gradient, Hill Start Control Pro is activated automatically.
- The selected setting is retained even after the ignition is turned off.
See also:
BMW R 1250 GS GSA - Rider's Manual > Cruise-control system
- with cruise control OE Display while adjusting (road sign detection not active)
BMW R 1250 GS GSA - Rider's Manual > Anti-theft alarm system (DWA)
Activation - with anti-theft alarm system (DWA) OE Switching on ignition. Adjust DWA. Turn off ignition. If DWA is activated, DWA is automatically activated after the ignition is switched off. Activation takes approximately 30 seconds to complete. Turn indicators are illuminated twice. Confirmation tone sounds twice (if programmed). The anti-theft alarm system is active.