Royal Enfield Interceptor 650 - Owner's Manual > Gear Shifting, Riding and Stopping, Parking
See also:
Royal Enfield Interceptor 650 - Owner's Manual > Starting
To shift into neutral, move the motorcycle back and forth gently, while simultaneously shifting the gear. Ensure gear is in neutral position and the neutral lamp is glowing in the instrument cluster. Turn ignition key to "ON" position and engine kill switch on right hand side handle bar to "RUN" position . When both the ignition and engine kill switch is in "ON" position and after the vehicle is started, the MIL will glow for a few seconds and turns "OFF", this indicates that all the function of the electronic fuel injection (EFI) system is functioning normally. In the event of any malfunction in the EFI system the MIL will glow continuously.
Royal Enfield Interceptor 650 - Owner's Manual > Gear Shifting, Riding and Stopping
The clutch lever must be fully depressed before attempting a gear shift. Failure to fully depress the clutch lever will cause a roughstart OR stalling of the engine besides causing damage to transmission parts. When the vehicle is in Neutral position, press gear shift lever down with toe to engage 1st gear.
Rider's Manual BMW R 1250 GS GSA
Owner's Manual Harley-Davidson Sportster XL1200X Forty-Eight
Owner's Manual Honda CBR650R
Service manual Honda CBR650
Owner's Manual Honda PCX125
Owner's Manual Kawasaki Z1000SX
Service manual Kawasaki Z1000SX
Owner's Manual Lexmoto Echo
Owner's Manual Royal Enfield Interceptor 650
Service manual Royal Enfield Interceptor 650
Owner's Manual Yamaha MT-07